MAINTENANCE
45
Maintenance Charts
Interval
Task
Check every 3 hours of operation
Cooling system ‑ Flush
Engine oil ‑ (reservoir) Check level
Power steering fluid ‑Check level
Sterndrive unit oil ‑ Check level
Transmission fluid ‑ Check level
Battery ‑ Check level and inspect for
damage
Power trim pump oil ‑ Check level
Anodes ‑ Inspect for erosion
Seawater pickups ‑ Check for marine
growth or debris
Every 15 hours of operation
VI SSM Tie bar mounting bracket
nuts. Tighten nuts to 102 Nm
(75 lb. ft.)
Check exhaust header mounting
bolts for tightness
Engine oil and filter ‑ Change
Check and adjust valve tip clearence
(lash)
Every 25 hours of operation or
every 90 days, whichever occurs
first.
Propeller shaft ‑ Lubricate
Propeller nut ‑ Retighten
Anodes ‑ Inspect for erosion
Flame arrestor ‑ Clean
Sterndrive ‑ Inspect and clean
Sterndrive oil filter and oil ‑ Change
oil and filter after first 25 hours.
Change oil and filter every 200 hrs.
thereafter.
Summary of Contents for HP1075 SCi
Page 4: ...iv...
Page 8: ...viii...
