MAINTENANCE
50
Check Drive Unit Oil Level As Follows:
1. Remove the drive vent plug "a." The oil level should be even with the
bottom of the hole. If low, remove the drain/fill plug and sealing washer
"b" from the gearcase and fill until oil comes out of the top vent plug "a"
opening.
a
b
7429
a -
Drive unit vent plug
b -
Fill/Drain plug and sealing washer
Tube Ref.
No.
Description
Where Used
Part No.
Torco MTF Gear Oil
Gearcase
92‑849684‑1
2. Install the drive vent plug.
3. Remove the filler tube and quickly install the fill/drain plug and sealing
washer.
4. Re‑check the oil level at the vent plug.
Summary of Contents for HP1075 SCi
Page 4: ...iv...
Page 8: ...viii...
