P 15
Please retain product label and instructions for future reference
Step 23
Parts needed - No. 48 QTY 3
Place 2x ‘Roof Truss A’
(No. 48)
flush to the inside of the gable.
Fix in place by screwing into the
purlin at an angle as shown in
the illustration using 1x90mm
screws per Roof Truss.
*Ensure to stagger screws to
avoid screws colliding.
2x90mm Screws
90mm
screw
Pre drill
hole
48
48
Please note: You can adjust the
blocks attached to the roof
truss’ if necessary
.
48
48
Roof Assembly 1
Roof Assembly 2
IMPORTANT:
Pre-drill before fixing screws.
48
48
48
Rubber Mallet
may be required
to fit parts.
Please note: You can adjust the
blocks attached to the roof
truss’ if necessary
.
IMPORTANT:
Pre-drill before fixing screws.
Step 24
Parts needed - No. 46 QTY 1
No. 47 QTY 1
Secure the shortest Roof Truss’
(
No. 46 & 47
) to ‘Roof Truss B’
(No.49)
as shown in the illustration
using 1x90mm screws per truss.
*Ensure the angled side of the
short truss is flush with the side of
the long truss. Then make sure the
block under the short truss is flush
against the wall of the building.
*Ensure to stagger screws to avoid
screws colliding.
2x90mm Screws
Pre drill
hole
90mm
screw
47
46
47
46
46
47
Roof Assembly 1
Roof Assembly 2
46
47
Rubber Mallet
may be required
to fit parts.
