P 24
Please retain product label and instructions for future reference
IMPORTANT:
Pre-drill before fixing screws.
65
62
Step 43
Parts needed - No. 62 QTY 1
No. 63 QTY 1
No. 64 QTY 2
No. 65 QTY 2
Attach the first fascias (
No.62 &
65)
to the back sides of the log
cabin, ensuring to trap the felt
between the fascia and the
building.
Secure the fascia into position
using 4x40mm screws, making
sure to fix through the fascia
into the roof purlin, fascia block
and/or log boards.
Once in place, mark the excess
fascia with a pencil and then
trim the fascias to follow the
shape of building as shown in
the illustration.
Attach the rest of the fascias
(No. 63, & 64)
to the front sides
of the log cabin and cut to size
in the same way as
previously stated.
34x40mm Screws
Pre drill
hole
40mm
screw
63
64
64
65
65
65
62
Pre drill
hole
80mm
bolt
66
66
Step 44
Parts needed - No. 66 QTY 8
Arrange the storm braces (
No. 66
) around
the building (
internally
). Place 2x storm
braces per side fixing into place using 2x
80mm bolts per brace making sure the
washer & nut are tightened from the
outside of the building.
*Ensure the storm braces are secured at
the highest point possible on each side.
The storm braces will need to be altered
during the buildings life as the moisture
content within the log boards changes.
The boards will expand during periods of
high moisture (Winter) and shrink during
periods of low moisture (Summer.)
**Storm braces will help your building
expand and contract properly.
***It is important that each bolt is
tightened using a washer so as not to
damage the log boards.
16x80mm Bolt Sets
