P 9
Please retain product label and instructions for future reference
17a
Step 8
To adjust and align your doors:
1. Lift up the doors to separate the two parts
of the hinge.
2. Turn the rotating barrel
(No.17a)
in / out
to move the postion of the doors either in or
away from each other.
3. You can then place the door(s) back on to
the hinge and check the whether they
require more / less adjustments, if further
adjustments are required repeat number 2.
Step 9
Once you have laid 6 log boards (
off of the starter
)
up the door section, slide the assembled door
frame over the boards resting the frame on top of
the starter board
(if you have not yet assembled
the door frame refer to step 6)
*Please note:
This image is for illustrative purposes
and may differ from your choice in product
(
regarding door position
). Nevertheless the
process of fitting the door frame is the same.
Step 10
Parts needed - No. 23 QTY 6
No. 24 QTY 6
No. 29 QTY 12
No. 30 QTY 6
No. 31 QTY 6
No. 41 QTY 11
Lay the next 6 boards
(No. 23,
24, 29, 30, 31 & 41 )
onto the log
cabin to create your second
level, following the method as
shown in the illustration.
*Ensure that the boards are
level and flush with each other
as you lay each one.
41
29
29
41
23
24
30
31
Rubber Mallet
may be required
to fit parts.
