P21
Please retain product label and instructions for future reference
Pre drill
hole
Step 36
Parts Needed - No. 18 QTY 1
No. 19 QTY 1
No. 20 QTY 1
Fit the Mortice lock (
No. 19
) into the
recess in the master door (
No. 9
) and secure
using the screws provided. Attach the Key
plate (
No. 20
) to the secondary door (
No. 10
)
with 4x30mm screws.
Fit the door handles (
No. 18
) and
connect with the metalbar to the mortice
lock using 8x30mm screws. Ensure the lock
mechanism closes correctly. If not, remove
the lock and turn the catch around using the
small grub screw.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
). Neverthe-
less the process of fixing the frames is the same.
Once components have been fitted, try closing
doors to ensure the doors can be closed and
the lock works.
If your doors do need adjusting please refer to
the step 8, if not proceed to step 37
12x30mm Screws
a
b
30mm
screw
The Mortice Lock is Reversible
a
b
20
19
10
9
18
Step 37
Parts Needed - No. 15 QTY 1
No. 21 QTY 2
Attach the door strip (
No. 15
) to
the back of secondary door using
4x40mm screws as shown in the illustra-
tion.
Once fixed, place the Tower
Bolts (
No. 21
) roughly into position and
with a pencil mark around the bolt.
After marking the bolt onto the
frame, drill a hole for the barrel bolt to
locate into.
Following the hole being drilled,
place the tower bolts into position and
secure using the screws provided.
12x40mm Screws
Pre drill
hole
40mm
screw
21
a
b
c
15
d
b
c
d
a
