P 8
Please retain product label and instructions for future reference
2
4
IMPORTANT :
Pre-drill before fixing screws.
Step 10
Parts Needed - No. 2 QTY 2
No. 3 QTY 2
No. 4 QTY 2
No. 5 QTY 2
Arrange the left, right, top & bottom window
frames (
No’s. 2, 3, 4,& 5
) onto a firm and level
surface. Secure the top and bottom frames to
the uprights using 2x80mm screw per corner,
ensuring the screws do
NOT
protrude through
the front of the window framing.
Repeat the assembly outlined twice to create
two window frames.
16x80mm Screws
Pre drill
hole
80mm
screw
5
3
5
3
The internal lip of the window
frame should be positioned on
the inside of the building.
Pre drill
hole
30mm
screw
Step 11
Parts Needed - No. 1 QTY 2
No. 7 QTY 4
Position the window
(No. 1)
so that it
sits centrally within the window frame.
Fix the female part of the flag hinge
(No.
7)
to the window using 4x30mm screws,
attach the male part of the flag hinge
(No. 7)
to the window frame using
4x30mm screws ensuring that the
window can open and close freely.
*Ensure to attach the hinge to the
horizontal frame of the window*
Repeat this method for both windows
**It is important to fit the windows
within the frame at this stage so that
you can establish the position of the
hinges. The hinges come in two parts.
Remove the window from the frame
after fitting.
32x30mm Screws
IMPORTANT :
Pre-drill before fixing screws.
1
7
7
7
Step 12
Once you have laid the second level of
boards onto the log cabin slide the
windows between the smaller boards
and rest on to the longer board
(if you
have not yet assembled the window
frames refer to step 8)
*Ensure the boards are level with
each end.
*Please note:
This image is for
illustrative purposes and may differ
from your choice in product (
regarding
window position
).
Nevertheless the process of fitting the
window is the same
