P 7
17a
Step 7
To adjust and align your doors:
1. Lift up the doors to separate the two parts
of the hinge.
2. Turn the rotating barrel
(No.17a)
in / out
to move the postion of the doors either in or
away from each other.
3. You can then place the door(s) back on to
the hinge and check the whether they
require more / less adjustments, if further
adjustments are required repeat number 2.
Step 8
Once you have laid 6 log boards (
on top of the
starter board
) up the door section, slide the
assembled door frame over the boards resting
the frame on top of the starter board
(if you have
not yet assembled the door frame refer to step
5)
*Please note:
This image is for illustrative purposes
and may differ from your choice in product
(
regarding door position
). Nevertheless the
process of fitting the door frame is the same.
**Please Note:
The short boards at the front of the
building (either side of the door and window
opening’s) can be placed either side depending on
Step 9
Parts needed - No. 24 QTY 6
No. 25 QTY 12
No. 27 QTY 6
No. 28 QTY 12
No. 29 QTY 6
Following the method shown in the
illustration, lay the next 6 boards
(
No’s. 24, 25, 27, 28, 29)
onto the log
cabin to create your second level.
*Ensure that the boards are level
and flush with each other as you lay
each one.
***Please Note:
The short boards
placed to create the opening’s for the
doors & windows can be placed either
side depending on your needs.
24
25
25
27
28
28
29
Please retain product label and instructions for future reference
