;
Additional speedometer (United Kingdom
only)
Permanent display (not for United King-
dom): outside temperature or speed
(
Y
page 227)
120 km/h!
(only for certain countries) max-
imum permissible speed exceeded
=
Display panel for display messages, menus
and menu bar
?
Z
Gearshift recommendation (
Y
page 161)
A
Fuel level
B
è
ECO start/stop function
(
Y
page 163)
C
è
Rear window wiper (
Y
page 128)
Display panel
=
shows the selected menu or
submenu and display messages.
Menu overview
The
Settings
menu is only displayed when the
vehicle is stationary. You can think of the order
of the menus and functions as a circle. Press
È
on the instrument cluster to scroll through the
menus.
If you scroll forwards in the
Settings
menu
using
3
, the setting from the previous submenu
or function is adopted.
If you press
È
in a submenu, the submenu or
function is exited without adopting the setting.
The display then shows the start screen of the
Settings
menu.
Operation information can be found under
"Operating the on-board computer"
(
Y
page 222).
Depending on the vehicle equipment, you can
call up the following menus, displays or func-
tions:
R
trip odometer and total distance recorder dis-
play (
Y
page 223)
R
trip computer display (
Y
page 224)
R
current range display (
Y
page 224)
R
current fuel consumption display
(
Y
page 224)
R
digital speedometer (
Y
page 224)
R
coolant temperature display (
Y
page 224)
R
AdBlue
®
display level in BlueTEC
®
vehicles
(
Y
page 225)
R
display messages in the message memory
(
Y
page 243)
The following menus, displays and functions are
only displayed when the vehicle is stationary:
R
next service due date display (
Y
page 333)
R
electronic check of the engine oil level
(
Y
page 325)
R
tyre pressure monitor restart (
Y
page 361)
R
Settings
menu for setting or activating/
deactivating driving and driver assistance
systems as well as display options
(
Y
page 225)
Distance menu
Odometer
If the display shows the speed in the header, the
display beside trip odometer
:
also shows the
outside temperature.
You can switch the permanent display in the
header (
Y
page 227) (not for the United King-
dom).
Use the buttons in the instrument cluster.
X
To display: press and hold
È
until the dis-
play shows the odometer for trip odometer
:
and total distance recorder
;
.
X
To reset: press and hold
3
until the trip
meter is reset to
0.0
.
You can set the unit of measurement for the trip
meter in the
Disp. unit distance:
submenu
(
Y
page 227).
On-board computer (vehicles without steering wheel buttons)
223
On-board computer and displays
Z
