X
Insert the folding table into the guide rails so
that arrows
;
on the folding table point to
both markings
=
on guide rail
?
.
The guides and sliding rail on the underside of
the folding table fit into the guide rail.
X
Pull lever
A
on the front or rear side of the
folding table upwards and push the folding
table backwards.
The folding table is properly inserted if:
R
you can slide it along the guide rail with
lever
A
pulled up
R
you cannot lift it into a position other than
the installation position
X
Press both covers
:
slightly together and
click into the openings of the guide rails.
X
Keep lever
A
pulled and move the folding
table into the desired position.
X
Move the folding table to the front or the back
until you can feel resistance while you press
down lever
A
.
X
Press lever
A
down against the resistance to
the stop.
The folding table is correctly secured.
Repositioning the folding table
X
Keep lever
A
pulled and move the folding
table into the desired position.
X
Release lever
A
.
X
Move the folding table until it automatically
engages in the next possible position.
X
After repositioning the table, ensure that the
folding table is properly secured again.
Adjusting the height of the folding
table
X
To raise: press table height adjustment but-
ton
:
down fully against the resistance.
X
Release button
:
.
The folding table moves upwards and
engages automatically.
Tilt the backrest back slightly if it is no longer
possible to adjust the armrest with the folding
table extended.
X
To lower: press table height adjustment but-
ton
:
down fully against the resistance.
X
Press and hold button
:
and simultaneously
press the centre section of the folding table
down.
X
Release button
:
when the folding table is in
its lowered position.
The centre section of the folding table
engages automatically.
306
Folding table
Stowing and features
