Retainer loops
:
To adjust the seat backrest
;
Moving the seat/berth combination
The seat/berth combination can accommodate
three persons. You can adjust the seat backrest
to a vertical and horizontal position. If you adjust
the seat backrest to the horizontal position,
together with the bed extension, you will have a
full-length bed for two people.
Passengers may only use the seats of the seat/
berth combination when the seat backrest is
upright. Only then do the seat belts provide the
intended degree of protection.
The seat/berth combination is fitted with two
removable stowage compartments under the
seat cushion (
Y
page 304). You can use these
stowage compartments to store bedding, for
example.
You can find further information on moving and
fitting/removing the seat/berth combination
under:
R
Moving the rear bench seat (
Y
page 102)
R
Removing/fitting the rear bench seat
(
Y
page 103)
Bed extension
If you fold up the bed extension or remove it, you
enlarge the luggage compartment.
X
To fold up: pull release lever
:
back and
move bed extension
;
into an upright posi-
tion.
The bed extension engages in a vertical posi-
tion.
X
To remove: fold up bed extension
;
.
X
Remove both thumbscrews
=
on both the
right and the left side.
X
Remove bed extension
;
from the guide
rails.
X
To fit: align bed extension
;
over the guide
rails and insert it.
X
Screw in both thumbscrews
=
on both the
right and the left side.
Setting up/folding away the berth
G
WARNING
A vehicle occupant on the bed while the vehi-
cle is in motion cannot be restrained. There is
a risk of serious or even fatal injuries.
Only use the bed when the vehicle is station-
ary.
G
WARNING
When folding the seat backrest up or down,
you or other vehicle occupants could become
trapped. There is a risk of injury.
Make sure that the seat backrest swinging
range is not obstructed and that no one could
become trapped.
106
Seats
Seats, steering wheel and mirrors
