![Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual Download Page 141](http://html1.mh-extra.com/html/mercedes-benz/sprinter-907-2018/sprinter-907-2018_operating-instructions-manual_1771924141.webp)
AdBlue
®
refill bottle
Only screw the AdBlue
®
refill bottle on hand-
tight. It may otherwise be damaged.
AdBlue
®
refill bottles
1
can be obtained at
many filling stations or at a Mercedes-Benz
service centre. Refill bottles without a threaded
cap offer no overfill protection. AdBlue
®
may leak
out as a result of overfilling. Mercedes-Benz
offers special refill bottles with a threaded cap.
These are available at any Mercedes-Benz service
centre.
#
Unscrew the protective cap from AdBlue
®
refill bottle
1
.
#
Place AdBlue
®
refill bottle
1
as shown on
filler opening
2
and screw it on clockwise
until hand-tight.
#
Press AdBlue
®
refill bottle
1
towards filler
opening
2
.
The AdBlue
®
tank is filled. This could take up
to one minute.
%
When the AdBlue
®
refill bottle is no longer
pressed down, filling stops. The bottle can be
removed when it has been only partially emp‐
tied.
#
Release AdBlue
®
refill bottle
1
.
#
Turn AdBlue
®
refill bottle
1
anti-clockwise
and remove it.
#
Screw the protective cap onto AdBlue
®
refill
bottle
1
again.
Filling procedure with the pump nozzle of an
AdBlue
®
filling pump
#
Insert the pump nozzle into the filler neck and
top up with AdBlue
®
. When doing so, do not
overfill the AdBlue
®
tank.
#
If the pump nozzle switches off during filling,
do not continue the filling procedure.
The AdBlue
®
tank is completely full.
%
You can also use an AdBlue
®
filling pump for
lorries.
Closing the AdBlue
®
filler cap on filler caps
that are not lockable
#
After filling the AdBlue
®
tank, place AdBlue
®
filler cap
1
on the filler neck and turn it
clockwise.
#
Turn the AdBlue
®
filler cap until the lettering
is legible and horizontal.
The filler neck is only locked correctly when
this is the case.
#
Close the bonnet.
Driving and parking
139