57
G60.80-3425-00
Introduction of the New Unimog Generation | Model Series 405
Cab exterior
Design
Cab
Material
The cab is made of fiber composite (FVW) and is thus
corrosion-free. This also provides a massive weight saving.
Integrated damping layers provide good noise and thermal
insulation properties. The material, which consists of multiple
fiber layers, ensures a high level of strength, visual durability
and longevity.
The water-soluble paints are more environmentally compa-
tible due to the lower waste quantities produced (< 5 %). All
plastic parts > 100 g are labeled in accordance with the ISO/
VDA regulations, which describe environmentally compatible
disposal.
The all-round heat-insulating glass significantly reduces the
tendency of the interior compartment to heat up, while the
windshield is made of laminated glass which protects against
injuries in the event of an accident.
Safety
All cabs are tested in accordance with ECE-R 29/02 and
thus meet a high standard of safety. A UVV rollover test in ac-
cordance with PAS 16 and accepted by the agricultural trade
association of Baden means that the vehicle is permitted for
use in agriculture and the forestry industry (LoF).
A low inflammability test as per FMVSS 571.302, (tested low
inflammability of materials), including on the interior equip-
ment, has confirmed the low inflammability of the vehicle.
– This printout will not be recorded by the update service. Status: 03 / 2013 –
