background image

61

G68.00-3130-00

G54.10-3260-00

G68.20-3139-00

Introduction of the New Unimog Generation | Model Series 405

Center console

Design

Rear stowage box

Socket behind driver seat

The center console, with switches arranged in blocks, facili-
tates simple operation with a variable modular switch panel 
(MSF). Furthermore, there is a 24 V on-board socket on the 
center console.

A stowage box behind the seats provides a large stowage fa-
cility for individual items. Door pockets with integrated bottle 
holders offer additional stowage space.

An equipment socket (code E87) equipped with C3 signals 
for equipment operation is also integrated in the cab. Cable 
holes sealed with plugs simplify the connection of equipment.

The following sockets and universal electrical interfaces are 
available:

• 

12 V socket in the center console and 12 V socket behind 
the driver seat, switchable using a switch on the center 
console (code E37)

• 

24 V on-board socket with C3 signals behind the driver 
seat (code ED6)

• 

24 V socket/cigarette lighter in the center console 
(standard)

• 

Two equipment sockets (9-pin) on the end face of the 
center console (code ES6, not yet available)

Center console

– This printout will not be recorded by the update service. Status: 03 / 2013 –

Summary of Contents for Series 405









































































































Reviews: