*
NOTE Damage to the drive train due to
incorrect positioning of the vehicle
#
Do not position the vehicle above the
connection point of the transport vehi-
cle.
Unloading the vehicle
#
Make sure that the vehicle is raised to trans-
port level before unloading.
Lowering the vehicle after unloading
#
Switch on the power supply.
#
Start the vehicle.
#
In Transport Settings, swipe up to select the
Standard Level
and press
a
.
The vehicle is adjusted to the height of the last
active level and the
Lowering Vehicle…
mes-
sage is displayed.
#
After the vehicle has been lowered, press the
G
button for at least two seconds.
Transport Settings closes.
Towing eye storage location
Towing eye
1
is located under the trunk floor.
Depending on the vehicle version, the towing eye
is in a different position in the boot.
Installing and removing the towing eye
#
Press the mark on cover
1
inwards and
remove.
#
Screw in the towing eye clockwise as far as it
will go and tighten.
438 Breakdown assistance
Summary of Contents for S-Class 2023
