Switching on high beam
#
Turn the light switch to the
L
or
Ã
position.
#
Push the combination switch in the direction
of arrow
1
.
When high beam is activated, the indicator
lamp for low beam
L
will be deactivated
and replaced by the indicator lamp for high
beam
K
.
Switching off high beam
#
Push the combination switch in the direction
of arrow
1
or pull it in the direction of arrow
3
.
Headlamp flashing
#
Pull the combination switch in the direction of
arrow
3
.
Turn signals
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow
2
or
4
.
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combina-
tion switch beyond the point of resistance in
the direction of arrow
2
or
4
.
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
Activating/deactivating the hazard warning lights
#
Press button
1
.
The hazard warning lights will switch on automati-
cally if:
R
the air bag has been deployed.
166 Light and visibility
Summary of Contents for S-Class 2023
