Mercedes-Benz S-Class 2023, Operator'S Manual

Page: 439 / 622

#
Ensure that no persons or obstacles are
located in the area surrounding the vehi-
cle.
Raising the vehicle to transport level
#
Press the G button for at least five sec-
onds.
#
Immediately press and hold the
a
button
for at least one second.
The For Transport Level Switch On Vehicle
message is displayed.
#
Switch on the vehicle(
/
page 203).
The transport settings are displayed.
#
Swipe downward to select
Transport Level
and press
a
.
The vehicle is raised and the Vehicle raising...
Do not drive onto ramp yet message is dis-
played for 5 seconds. The raising process can
last up to 60 seconds and can be canceled
with the G button.
#
When raising, do not switch off the vehicle.
While the vehicle is being raised, you can maneu-
ver at a maximum speed of 25 mph (40 km/h).
#
Before loading the vehicle, wait until the trans-
port level has been reached and the
Trans-
port Level status is shown.
%
If the vehicle is raised to transport level, the
transport settings will continue to be shown
even after a restart. Operation of the driver's
display is restricted.
When the vehicle is at transport level, it is lowered
again in the following situations:
R
When driving faster than 25 mph (40 km/h).
R
The 12 V battery is discharged.
The vehicle is adjusted to the height of the last
active level.
Transporting the vehicle
#
Load the vehicle onto the transporter.
#
Shift the transmission to position
j
.
#
Use the electric parking brake to secure the
vehicle against rolling away.
#
Switch off the vehicle and the power supply.
#
Only secure the vehicle by the wheels.
4MATIC vehicles
#
Make sure that the front and rear axles come
to rest on the same transportation vehicle.
Breakdown assistance 437