Mercedes-Benz MY02 Operator'S Manual Download

Page: 84 / 165

Introduction

Audio

Telephone

Navigation

Index

System settings

After new information has been downloaded “NEW
INFO RECEIVED READ LATER WHEN STOPPED“
appears on the screen.

By pressing the softkey

“YES“ you will switch

back to the current background audio mode (e. g. radio
mode).

By pressing the softkey

“NO“ the new informa-

tions will appear on the screen.

With the softkeys

and

or with the joy-

stick you can flip to the next or previous page.

To exit the Info Service mode press the softkey

“EXIT“ you will return to the main telephone menu.

P82.85-7154-26

Warning!

In order to avoid distraction which could lead to an
accident, information should only be read with the
vehicle at stillstand and the system should be oper-
ated by the driver only when traffic condition per-
mit.

Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is covering a
distance of 50 feet (approximately 14 m) every sec-
ond.

Info Service

Summary of Contents for MY02






































































































































































Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands

Mercedes-Benz MY02, Operator'S Manual

Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands