Mercedes-Benz MY02 Operator'S Manual Download

Page: 92 / 165

Introduction

Audio

Telephone

Navigation

Index

System settings

Switching navigation operation on and off

The navigation operation starts by pressing the button

Only during the software loading process the navigation
start up screen appears.

Note:

The navigation system starts only after a navigation CD
has been inserted in the CD slot.

After the navigation system is booted the disclaimer
screen appears. If you accept the statements press

Note:

The radio, tape, CD changer or telephone function can
be used while the navigation system is running.

To switch off navigation operation:

Switch to the radio, tape or CD changer mode and the
navigation system will continue to run in the back-
ground. If you switch off the MCS, the navigation and
audio system will also switch off.

Destination input

Summary of Contents for MY02






































































































































































Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands

Mercedes-Benz MY02, Operator'S Manual

Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands