Mercedes-Benz MY02 Operator'S Manual Download

Page: 162 / 165

158

Introduction

Audio

Telephone

Navigation

Index

System settings

Setting the display dimming characteristics

You can set the monitor’s dimming characteristics for
the navigation mode.

Start navigation mode, page 86.

Press .
Select the menu “Setup” with the joystick and press

Select the “Display” menu by pushing the joystick up or
down and press

The display menu will appear with the current settings.

You have 3 choices of display modes:

• “Day” mode: The display colors are always bright.

• “Night” mode: The display colors are always dark.

• “Auto” mode: The display switches automatically

between Night and Day mode when the parking
lights are turned on and off.

After selecting the mode press

To return to the navigation mode, select “Return” with
the joystick and press

P82.85-5072-26

P86-0081-B13 (2-fbg)

Summary of Contents for MY02






































































































































































Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands

Mercedes-Benz MY02, Operator'S Manual

Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands