Mercedes-Benz MY02 Operator'S Manual Download

Page: 12 / 165

Introduction

Audio

Telephone

Navigation

Index

System settings

Joystick

The joystick is the main operating element for activating
equipment functions and submenus via the menu
fields.

Activate these functions as follows:

Push the joystick in the direction you want to move
the cursor on the display. Select the desired menu
field by positioning the cursor on it.

Push the joystick to

start rewind or search functions in the radio, tape or
CD mode.

Press the joystick to confirm your selection.

The selected function will activate, or a submenu
may appear or a selection will be confirmed.

Softkeys

With the softkeys

the submenus and functions

which appear above the softkeys on the display can be
activated.

Key

This key starts a telephone call.

Key

This key ends a telephone call.

Introductions

Summary of Contents for MY02






































































































































































Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands

Mercedes-Benz MY02, Operator'S Manual

Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands