Mercedes-Benz MY02 Operator'S Manual Download

Page: 158 / 165

154

Introduction

Audio

Telephone

Navigation

Index

System settings

Use the softkeys

“-” and “+” or “L“ and “R“ to set

the desired value.

Once you are satisfied with the sound setting press soft-
key

“EXIT”.

Press and hold both softkeys

“-” and “+” for longer

then 2 seconds to reset the selected parameter.

Vehicles with sound system:

With the softkeys

and

select the

parameter “SOUND“.

You can select with the softkeys

and

the desired sound impression.

Sound impressions available:

• Standard - the sound is set to linear for the centre of

the vehicle

• Speech - emphasises voices

• Driver - the sound is set to the optimum values for

the front seats

• Ambience - recreates the sound of rooms

Note:

Sound optimisation is not available for the service
sources.

System settings

Summary of Contents for MY02






































































































































































Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands

Mercedes-Benz MY02, Operator'S Manual

Search results

Summary of Contents for MY02

Reviews:

Related manuals for MY02

Brands by name

Popular brands