During the braking procedure, you will receive the
following feedback from the vehicle:
R
A warning tone sounds.
R
The
Release Parking Brake
message appears
in the multifunction display.
R
The red
F
and
!
indicator lamps ash
in the multifunction display.
When the vehicle has been braked to a standstill,
the electric parking brake is applied.
PPar
arking t
king the v
he vehicle f
ehicle for an e
or an ext
xtended per
ended period
iod
*
NNOOTE
TE Starter battery damage due to leav-
ing the vehicle standing idle for extended
periods of time
If the vehicle is not moved for a prolonged
period, quiescent current can lead to excessive
discharge of the starter battery and cause bat-
tery damage.
#
Charge the starter battery if the voltage
is below 12.2 V, for example by driving a
considerable distance.
#
Charge the starter battery every six
months, even if it has been disconnected
or is in standby mode.
#
Check the charge level every four weeks
if no trickle charger is being used.
#
If possible, connect a trickle charger to
the jump-start connection point.
#
Consult a quali ed specialist workshop to
disconnect the battery or if you have any
questions.
PPar
arking t
king the v
he vehicle f
ehicle for ov
or over f
er four w
our weeks
eeks
#
Met
Method 1:
hod 1: connect the batteries to a trickle
charger via the jump-start connection.
#
Met
Method 2:
hod 2: interrupt the power supply by acti-
vating standby mode (
/
page 138).
#
Met
Method 3:
hod 3: disconnect all batteries. For this,
please contact a quali ed specialist workshop.
SSttandb
andby mode
y mode
AActiv
ctivating or deactiv
ating or deactivating st
ating standb
andby mode
y mode
RReq
equir
uirements:
ements:
R
The engine is switched o .
If standby mode is activated, energy loss will be
minimized during extended periods of non-opera-
tion.
Standby mode is characterized by the following:
R
The starter battery is preserved.
R
The maximum non-operational time appears in
the media display.
R
The connection to online services is interrup-
ted.
R
The ATA (anti-the alarm system) is unavaila-
ble.
R
The interior motion sensor and tow-away alarm
functions are not available.
If the following conditions are ful lled, standby
mode can be activated or deactivated using the
multimedia system:
R
The engine is switched o .
R
The ignition is switched on.
Exceeding the vehicle's displayed non-operational
time may cause inconvenience, for example it can-
not be guaranteed that the starter battery will reli-
ably start the engine.
Charge the starter battery rst in the following sit-
uations:
R
In order to extend the vehicle's non-opera-
tional time.
R
The
Battery Charge Insufficient for Standby
Mode
message appears in the media display.
%
Standby mode is automatically deactivated
when the ignition is switched on.
On-board computer:
4
Settings
5
Vehicle
5
Standby Mode
#
TTo activ
o activat
ate/deactiv
e/deactivat
ate:
e: select
Yes
or
No
.
%
If the options are grayed out, the condition of
charge of the battery is not su cient for
standby mode.
Dr
Driving and dr
iving and driving safe
iving safety syst
ty systems
ems
NNoottes on dr
es on driving syst
iving systems and y
ems and your r
our responsibility
esponsibility
Your vehicle is equipped with driving systems
which assist you in driving, parking and maneuver-
138
138 Driving and parking
