1
Low beam/perimeter light housing cover
2
High beam/daytime running lamps housing
cover
3
Turn signal light socket
#
Switch o the lighting system.
#
Lo
Low beam/per
w beam/perimet
imeter light
er light:: remove housing
cover
1
towards the rear.
#
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the base
of the socket.
#
Align and insert the socket.
#
Attach housing cover
1
.
#
High beam/da
High beam/daytime r
ytime running lam
unning lamps:
ps: remove
housing cover
2
towards the rear.
#
Turn the socket counter-clockwise and pull it
out.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the base
of the socket.
#
Insert the socket and turn it clockwise.
#
Attach housing cover
2
.
#
TTur
urn signal light
n signal light::
#
Turn socket
3
counter-clockwise and remove
it.
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Insert socket
3
and turn it clockwise.
AAdditional tur
dditional turn signal light
n signal light
RReq
equir
uirements:
ements:
R
AAdditional tur
dditional turn signal light (all-wheel dr
n signal light (all-wheel drivive v
e vehi-
ehi-
cles):
cles): bulb type P 21 W
#
Switching o the lighting system.
#
Unscrew screws
1
and remove lens
2
.
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Place lens
2
in position and tighten the
screws
1
.
RReplacing r
eplacing rear light bulbs (Car
ear light bulbs (Cargo V
go Van and
an and
PPasseng
assenger V
er Van)
an)
Ov
Over
ervie
view of r
w of rear bulb types (Car
ear bulb types (Cargo V
go Van and
an and
PPasseng
assenger V
er Van)
an)
You can replace the following bulbs.
90
90
Light and vision
