#
To secure the mobile phone: swing lever
2
out.
Radio equipment approval numbers for Brazil
This device operates on a secondary basis, that is
to say it has no protection against harmful inter-
ference, not even from the same type of stations,
and must not cause interference with systems
operating on a primary basis.
This product is permitted in accordance with the
procedure defined in Directive 242/2000 by the
Brazilian telecommunications agency ANATEL and
meets the applicable technical requirements.
Further information is available on the ANATEL
website. www.anatel.gov.br
#
Further information on the declaration of con-
formity for vehicle components which receive
and/or transmit radio waves.
Fitting/removing the floor mats
&
WARNING Risk of accident due to objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
#
Always fit the floor mats securely and as
prescribed in order to ensure that there
is always sufficient room for the pedals.
#
Do not use loose floor mats and do not
place floor mats on top of one another.
Fitting floor mats
#
Slide the corresponding seat backwards and
lay the floor mat in the footwell.
#
Press studs
1
onto holders
2
.
#
Adjust the corresponding seat.
Removing floor mats
#
Pull the floor mat off holders
2
.
140 Seats and stowing
Summary of Contents for EQA 2022
