Mercedes-Benz EQA 2022, Owner'S Manual

Page: 138 / 541

placed on the lower edge of load compart-
ment floor 3 .
%
Ensure that the luggage net does not block
the locking mechanism of the load compart-
ment floor.
#
Close the load compartment floor.
Adjusting the load compartment floor
Adjusting the height
*
NOTE Damage to the load compartment
floor due to loading in the upper position
with the bracket removed
If the load compartment floor is loaded in the
upper position and the bracket has been
removed, the load compartment floor may be
damaged.
#
Make sure that the load compartment
floor is not loaded in the upper position
when the bracket is removed.
The load compartment can be made larger or
smaller depending on requirements. To this end,
you can lock the load compartment floor at two
different heights. The higher position provides a
flat surface when the rear seat backrests are fol-
ded forward. Furthermore, you can remove a
bracket at the rear to create additional space
lengthways.
#
Lift load compartment floor 1 (in the bottom
position in the example) only slightly using
handle
3
and pull it towards you.
#
Insert load compartment floor 1 into rear fix-
tures 2 .
#
Fold load compartment floor 1 down.
Adjusting the length
#
Lift load compartment floor 1 (in the bottom
position in the example) only slightly using
handle 3 and pull it towards you.
#
Insert load compartment floor 1 into rear fix-
tures 2 .
#
Fold load compartment floor 1 down.
Seats and stowing 135