Mercedes-Benz EQA 2022, Owner'S Manual

Page: 154 / 541

Adjusting the brightness
#
Select Brightness .
#
Adjust the brightness.
Activating the brightness for zones
#
Select Brightness .
#
Select Brightness zones .
#
Activate or deactivate the function.
or
#
Set the brightness for the desired zones.
Activating multi-coloured lighting
#
Select Colour .
#
Select Multi-colour .
#
Select a colour combination.
Activating multi-coloured animation
#
Select Colour .
#
Select Multi-colour animat. .
The chosen colour combination will change at
predefined intervals.
Activating welcome lighting
#
Select Colour .
#
Select Welcome .
When the vehicle is unlocked, a special ambi-
ent lighting sequence will run.
Activating dependency on air conditioning set-
tings
#
Select Colour .
#
Select Climate .
If changes are made to the temperature set-
ting in the vehicle, the colour of the ambient
lighting will change briefly.
Switching the interior lighting switch-off delay
time on/off
Multimedia system:
4
©
5
Settings
5
Lights
5
Int. light. del. sw. off
#
Switch the switch-off delay time on or off.
When this function is active, the interior light-
ing lights up for a short time after the vehicle
is locked.
Changing bulbs (only for vehicles with halogen
headlamps)
Notes on changing bulbs
&
WARNING Risk of burns from hot compo-
nent parts whilst replacing a bulb
Bulbs, lamps and plugs can become very hot
during operation.
When replacing a bulb, you could burn your-
self on these component parts.
#
Allow the component parts to cool down
before replacing the bulb.
R
Do not use an illuminant if it has been drop-
ped or if its glass has been scratched. The illu-
minant may otherwise explode.
R
Do not touch the glass bulb with your bare
hands.
R
Protect illuminants from moisture and do not
allow them to come into contact with liquids.
Light and sight 151