Mercedes-Benz E 320 CDI, Operator'S Manual

Page: 378 / 521

377
Practical hints
What to do if …
Problem Possible cause/consequence Suggested solution
ú
(USA only)
±
(Canada only)
The yellow engine mal-
function indicator lamp
comes on while driving.
There is a malfunction in:
앫
The fuel management system
앫
The ignition system (Gasoline engine)
앫
The emission control system
앫
Systems which affect emissions
Such malfunctions may result in excessive
emissions values and may switch the engine
to its limp-home (emergency operation)
mode.
왘
Have the vehicle checked as soon as possi-
ble by an authorized Mercedes-Benz Center.
An on-board diagnostic connector is used
by the service station to link the vehicle to
the shop diagnostics system. It allows the
accurate identification of system malfunc-
tions through the readout of diagnostic trou-
ble codes. It is located in the front left area
of the footwell next to the parking brake.
A loss of pressure has been detected in the
fuel system. The fuel cap may not be closed
properly or the fuel system may be leaky.
왘
Check the fuel cap.
If it is not closed properly:
왘
Close the fuel cap.
If it is closed properly:
왘
Have the fuel system checked by an autho-
rized Mercedes-Benz Center.