Mercedes-Benz E 320 CDI, Operator'S Manual

Page: 343 / 521

342
Operation
Tires and wheels
왘
Press button
è
or
ÿ
on the mul-
tifunction steering wheel repeatedly
until the standard display menu ap-
pears in the multifunction display
(
컄
page 153).
왘
Press the
j
or
k
button repeat-
edly until you see the flowing message:
Tire pressure
monitor active
Reactivation possible:
R-button
왘
Press the reset button.
The following message will appear in
the multifunction display:
Check current
tire pressure?
왘
Press the
æ
button.
The following message will appear in
the multifunction display:
Tire pres. monitor
reactivated
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system’s
specified range. Afterwards the current
tire inflation pressures are accepted as
reference pressures and then moni-
tored.
If you wish to cancel activation:
왘
Press the
ç
button.
i
Reactivate the TPMS after adjusting
the tire inflation pressure to the infla-
tion pressure recommended for the
vehicle operating condition. Tire pres-
sure should only be adjusted on cold
tires. Observe the recommended tire
inflation pressure on the placard on the
driver’s door B-pillar (
컄
page 332).
Some vehicles may have supplemental
tire pressure information for driving at
high speeds (
컄
page 338) or for vehicle
loads less than the maximum loaded
vehicle condition. If such information is
provided, it can be found on the inside
of the fuel filler flap.
컄컄