Mercedes-Benz E 320 CDI, Operator'S Manual

Page: 243 / 521

242
Controls in detail
Panorama roof with power tilt/sliding panel*
Synchronizing the panorama roof with
power tilt/sliding panel
The tilt/sliding panel must be
synchronized
앫
after the battery has been
disconnected or discharged
앫
after the tilt/sliding panel has been
closed manually (
컄
page 429)
앫
after a malfunction
앫
if the tilt/sliding panel does not open
smoothly
왘
Remove the fuse from the main fuse
box (
컄
page 461).
왘
Reinsert the fuse in the main fuse box.
왘
Switch on the ignition (
컄
page 36).
왘
Move and hold the roof panel switch in
direction of arrow
2
until the roller
sunblinds are fully closed.
왘
Keep holding the roof panel switch in
direction of arrow
2
for approximately
1 second.
왘
Move and hold the roof panel switch in
direction of arrow
1
until the roller
sunblinds are fully opened.
왘
Keep holding the roof panel switch in
direction of arrow
1
for approximately
1 second.
왘
Move and hold the roof panel switch in
direction of arrow
3
until the tilt/slid-
ing panel is fully raised.
왘
Keep holding the roof panel switch in
direction of arrow
3
for approximately
1 second.
왘
Move and hold the roof panel switch in
direction of arrow
2
until the tilt/slid-
ing panel is fully closed.
왘
Keep holding the roof panel switch in
direction of arrow
2
for approximately
1 second.
왘
Check the Express-open feature of the
tilt/sliding panel (
컄
page 241).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized. Other-
wise repeat the above steps.