444
Practical hints
Flat tire
Removing the wheel
1
Alignment bolt
왘
Unscrew upper-most wheel bolt and re-
move.
왘
Replace this wheel bolt with alignment
bolt
1
supplied in the tool kit.
왘
Remove the remaining bolts.
왘
Remove the wheel.
Mounting the spare wheel
왘
Clean contact surfaces of wheel and
wheel hub.
Warning!
G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
앫
Never start the engine when the vehicle
is raised.
앫
Never lie down under the raised vehicle.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
!
To avoid paint damage, place wheel flat
against hub and hold it there while in-
stalling first wheel bolt.
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident. Be
sure to use the correct wheel bolts.
컄컄
Summary of Contents for E 320 CDI
