Mercedes-Benz Cls 500, Operator'S Manual

Page: 161 / 475

160
Controls in detail
Control system
Setting daytime running lamp mode
(USA only)
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until you see Lamp circuit headlamp in
the multifunction display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
manual operation ( manual ) or daytime
running lamp mode ( constant ).
With daytime running lamp mode activated
and the exterior lamp switch at
position
M
or
U
, the low beam
headlamps are switched on when the en-
gine is running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
For more information on the daytime
running lamp mode, see “Lighting”
(
컄
page 130).
i
This function is not available in coun-
tries where the daytime running lamp
mode is mandatory and therefore in a
constant mode.
i
For safety reasons, resetting the
Lighting submenu to factory settings
while driving (
컄
page 152) will not
deactivate the daytime running lamp
mode.
The following message appears in the
multifunction display:
Lighting - Can-
not be completely reset to factory
settings while driving.