Mercedes-Benz Cls 500, Operator'S Manual

Page: 221 / 475

220
Controls in detail
Driving systems
Activating Distronic
You can activate Distronic if:
앫
you are driving between 20 mph
(30 km/h) and 110 mph (180 km/h)
앫
the ESP is activated (
컄
page 81)
If Distronic has not been activated after
pressing the cruise control lever you will
see the message
---
in the multifunction
display.
In the following cases you cannot activate
Distronic:
앫
up to two minutes after starting the
engine
앫
when you brake
앫
if you have set the parking brake
앫
if the gear selector lever is in
position
P , R or N
앫
if the ESP is switched off
Setting the current speed
왘
Accelerate or decelerate to the desired
speed.
왘
Briefly lift or depress the cruise control
lever.
Distronic is activated and the current
speed is set.
왘
Remove your foot from the accelerator
pedal.
Setting a higher speed
왘
Briefly tip the cruise control lever in the
direction of arrow
1
(
컄
page 219) to
increase vehicle speed in increments
of 5 mph (Canada: 10 km/h).
The new speed is set.
The stored speed is displayed in the
multifunction display for approximately
five seconds (
컄
page 219), and one or
two segments around the stored speed
come on, on the speedometer
(
컄
page 217).
i
If you do not take your foot off the
accelerator completely, the following
message will appear in the multifunc-
tion display:
Distronic override .
The distance to a slower moving vehi-
cles in front of you will not be set. Your
vehicle speed will then be determined
only by the accelerator pedal position.
i
Depressing the accelerator pedal does
not deactivate Distronic. After brief
acceleration (e.g. for passing), the
cruise control will resume the last
speed set.