390
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1
Housing cover for low beam halogen or
Bi-Xenon* headlamp
2
Housing cover for high beam head-
lamp/high beam flasher bulb and for
parking and standing lamp bulb
3
Bulb socket for turn signal lamp bulb
4
Bulb holder of high beam bulb
5
Bulb socket for parking and standing
lamp bulb
6
Bulb holder of low beam bulb
Before you start to replace a bulb for a
front lamp, do the following first:
왘
Turn the exterior lamp switch to
position
M
(
컄
page 130).
왘
Open the hood (
컄
page 279) (except
for side marker lamps).
Low beam bulb (halogen headlamps
only)
왘
Turn housing cover
1
counterclock-
wise and remove it.
왘
Turn bulb holder
6
with the bulb coun-
terclockwise and remove it.
왘
Pull the bulb at its socket out of bulb
holder
6
.
왘
Insert the new bulb so that its socket
locates in the recess of bulb holder
6
and is level to it.
왘
Reinsert bulb holder
6
with the bulb in
the lamp and turn clockwise.
왘
Align housing cover
1
and turn it
clockwise.
Warning!
G
Do not remove the cover
1
for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
Summary of Contents for Cls 500
