Mercedes-Benz Cls 500, Operator'S Manual

Page: 162 / 475

161
Controls in detail
Control system
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position
U
, the following lamps will
switch on when the vehicle is unlocked
with the SmartKey or KEYLESS-GO* during
darkness:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
앫
Front fog lamps
The locator lighting switches off when the
driver’s door is opened.
If you do not open a door after unlocking
with the SmartKey the lamps will switch off
automatically after approximately
40 seconds.
왘
Move the selection marker with
button
æ
or
ç
to the
Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until you see Function Surround
lighting in the multifunction display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to switch
the locator lighting function on .
왘
Turn the exterior lamp switch to
position
U
when exiting the vehicle.
The locator lighting feature is activat-
ed.
Setting ambient lighting
Use this function to adjust the brightness
of the ambient lighting.
왘
Move the selection marker with
button
æ
or
ç
to the Lighting
submenu.
왘
Press button
j
or
k
repeatedly
until you see Ambient light Level in
the multifunction display.
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
the desired brightness of the ambient
lighting.
The setting 1 represents the darkest
level and setting 5 the brightest level.
The ambient light is switched off at set-
ting 0.