Mercedes-Benz Cls 500, Operator'S Manual

Page: 153 / 475

152
Controls in detail
Control system
왘
Press button
k
or
j
.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see “Vehicle status messag-
es in the multifunction display”
(
컄
page 345).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position
0 or
removed from the starter switch.
Settings menu
In the Settings menu there are two func-
tions:
앫
The function To reset: Press reset
button for 3 seconds , with which you
can reset all the settings to the original
factory settings.
앫
A collection of submenus with which
you can make individual settings for
your vehicle.
왘
Press button
è
or
ÿ
repeatedly
until the Settings menu is seen in the
display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
왘
Press the reset button in the instru-
ment cluster (
컄
page 24) for approxi-
mately three seconds.
In the display you will see the request
to press the reset button again to con-
firm.
왘
Press the reset button again.
The functions of all the submenus will
reset to factory settings.
i
The vehicle status message memory
will be cleared when you turn the
SmartKey in the starter switch to
position
1 or 2 . You will then only see
high priority messages in the multifunc-
tion display (
컄
page 345).
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button a second
time.