Mercedes-Benz Actros 2017, Operating Instructions Manual

Page: 151 / 436

Diagnostics menu window
Diagnostics data contains information with
which you can assist the workshop staff during
fault diagnosis, e.g. by remote diagnosis. The
Diagnosis menu window contains, for exam-
ple, a list of all control units (systems) installed
in the vehicle.
You can obtain further information from any
Mercedes-Benz Service Centre.
X
Use the
u
or
t
button to scroll to
ã
monitoring info.
X Use the
r
or
s
button to scroll to the
Diagnosis
menu window.
X
To display diagnostics data: press
9
.
The input window shows a list of all control
unit system abbreviations.
X Select the desired control unit using the
r
or
s
button.
X
Display further details on the control unit by
pressing the
u
button.
Settings menu
Menu window menu
If you change the settings in the
Menu
menu
window, the changes affect the display of the
menu window.
X
Use the
u
or
t
button to scroll to
ä
settings.
X To set the units of measurement: press the
9
button.
The input window displays a list of possible
settings:
R
clock mode in
24h
or
12h
R
speed in
km/h
or
mph
R
distance in km or mi
R
liquid units in
litres
,
UK gal
or
US gal
R
temperature units in
°C
or
°F
R
average fuel consumption in l/100 km , km/
l
or
mpg
R
pressure units in
bar/kpa
or
psi
R
weight units in t , tn or l.tn
X Select the desired menu bar with the
r
or
s
button.
X
Change the setting with the
u
or
t
button.
Lighting menu window
In the lighting menu window you can:
R
adjust the headlamp range of the dipped-
beam headlamps
R
adjust the brightness of the instrument clus-
ter lighting and audio display, when it is dark
and the lights are switched on
R
set the delayed switch-off of the exterior light-
ing (dipped-beam headlamps and foglamp)
for the surround lighting
R
switch the automatic control of the interior
lighting on/off
R
switch the nightlight (green) on/off
X Use the
u
or
t
button to scroll to
ä
settings.
X
Use the
r
or
s
button to scroll to the
Lighting menu window.
X Press the
9
button.
The menu window shows the
Headl. range
ctrl . input window.
X
To adjust the headlamp range of the
dipped-beam headlamps: change the set-
ting using the
u
or
t
button.
When the vehicle is laden, the road should be
illuminated from 40 m to 100 m and the
dipped-beam headlamps must not dazzle
oncoming vehicles. If the vehicle is unladen,
select position
u
.
X
To set the instrument cluster lighting: use
the
r
or
s
button to select
Instru‐
ment panel
.
If the light is switched off and night mode has
not been detected, the input window shows
Day mode
. Changing the settings is then no
longer possible. Otherwise, the input window
shows the brightness of the instrument clus-
ter lighting and of the audio display as a bar
display.
X Change the setting with the
u
or
t
button.
X
To set the delayed switch-off of the exte-
rior lighting: use the
r
or
s
button to
select
Delay switch-off, ext. light‐
ing .
The input window shows the delayed switch-
off time set for the exterior lighting (dipped-
beam headlamps and foglamp) for the sur-
round lighting.
On-board computer
149
On-board computer and displays
Z