Mercedes-Benz Actros 2017, Operating Instructions Manual

Page: 150 / 436

R
Rear axle
R
Transmission
R
Brakes, axle 1/2/3/4/5
R
Air filter
X
To reset the maintenance due date: press
the
r
or
s
button to display the
desired maintenance point.
If a reset is possible, the input window shows
Reset? .
X Press the
u
button.
The input window shows
No
/
Yes
.
X
Use the
r
button to select the Yes menu
bar and press the
u
or
9
button to con-
firm.
Monitoring info menu
Reservoir pressure menu window
X
To display the reservoir pressure: use the
u
or
t
button to scroll to
ã
monitor-
ing info.
The menu window shows the reservoir pres-
sure of brake circuits
\
and
^
as a bar
display.
Coolant menu window
X Use the
u
or
t
button to scroll to
ã
monitoring info.
X
To display the coolant temperature: use
the
r
or
s
button to scroll to the
Coolant menu window.
If the coolant level is too low, the coolant tem-
perature cannot be displayed.
Engine menu window
In the Engine menu window, you can check the
engine oil level and display the engine's operat-
ing hours. Check the engine oil level before the
start of every journey. The engine oil level is not
displayed while driving.
X
Park the vehicle on a level surface.
X
Apply the parking brake.
X Switch off the engine.
X Switch the ignition lock to the drive position.
X
Wait at least 5 minutes after switching off the
engine.
i If you call up the oil level too early or while
the engine is running, Not available
appears in the menu window.
X
Use the
u
or
t
button to scroll to
ã
monitoring info.
X
To display the engine oil level and operat-
ing hours: use the
r
or
s
button to
scroll to the Engine menu window.
The menu window shows:
R
the engine oil level
4
, e.g.
Oil level
ok or Oil level low and/or Top up
oil: 4 l
R
the
ý
operating hours of the engine,
e.g.
10000 h 27 min
The service counter is not suitable for
measuring the driving hours of the driver.
Use equipment which is suitable for this
purpose.
X
When the menu window displays Oil level
low
or
Oil level too low
, do not start the
engine. Immediately top up the amount of oil
shown (
Y
page 360) and check the oil level
again.
If the menu window shows
Oil level ok
and
Top up oil: 3 l
, the engine oil level is suf-
ficient. The amount of oil to top up to reach
the maximum fill level is purely for your infor-
mation. At the moment, you do not need to
top up the oil.
X
If the oil level display is not available, repeat
the oil level check.
X If it is not possible to display the oil level after
repeated attempts, have the oil level display
checked at a qualified specialist workshop.
Events menu window
You can display stored malfunctions and mes-
sages in the
Events
menu. If you have rectified
the cause of the malfunction/message, the on-
board computer no longer displays the event.
X
Use the
u
or
t
button to scroll to
ã
monitoring info.
X Use the
r
or
s
button to scroll to the
Events menu window.
The menu window shows, for example, the
number of events.
X To display an event: press
9
.
X To show further events: press the
r
or
s
button.
148
On-board computer
On-board computer and displays