Mercedes-Benz Actros 2017, Operating Instructions Manual, Page: 213 / 436

R
along the route.
R
near the destination.
Example of selecting a destination with
the address:
X Call up the navigation system menu.
X Select
Search
.
An input menu appears.
X
Enter the desired address.
X Select the desired location from the results
list.
X
To select a junction: select Junction .
X
To display a location on the map: select
Display on the map .
X To calculate a route: select
Drive
.
The route to the destination appears on the
map.
X
To start route guidance: select Let's
go...
The route view appears as soon as the vehicle
sets off.
Planning a route
X To specify the starting point: enter the
desired starting point.
The location appears on the map.
X
Call up the submenu.
X Select
Use as starting point
.
X
To specify the destination: select the
desired destination .
The destination appears on the map.
X Select
Drive
.
The route is calculated.
X
To select the current position as the start-
ing point: select the starting point on the
route.
X Call up the submenu.
X Select
Remove starting point
.
The route is recalculated with the current
vehicle position as the starting point.
X
To convert the starting point into a stop-
over: select the starting point in the route.
X Call up the submenu.
X
Select Convert into a stop .
X
To specify a stopover: enter the desired
stopover.
The destination appears on the map.
X
Select
Add to "Current route"
.
Stopovers are added to the route in the order
they are entered.
During route guidance
Route overview
When a route has been calculated, the complete
route appears as an overview on the map.
:
Destination
;
Traffic disruption
=
Stopover
?
Route bar
A
Current vehicle position
B
Planned route
C
To call up the navigation system menu
D
Map zoom
E
To switch between north orientation and
heading orientation
Navigation
211
DispoPilot.guide
Z