Mercedes-Benz Actros 2017, Operating Instructions Manual

Page: 241 / 436

When key
=
is inserted and Start/Stop but-
ton
:
:
R
is pushed in all the way, the ignition lock is
switched to position 3 and the engine starts
R
is pushed in to the first switching threshold,
the ignition lock is switched to the next posi-
tion, 0, 1 or 2
If you press the Start/Stop button when in
position 2, the ignition lock switches back to
position 0.
You can switch the engine off when the vehicle
is stationary by:
R
pressing Start/Stop button
:
as far as it will
go
The ignition lock is then in position
1.
R
pressing Start/Stop button
:
to the first
switching threshold and then release
The ignition lock is then in position
1.
R
removing key
=
from the ignition lock
The ignition lock is then in position 0.
Ignition run-on
The ignition run-on function is only available in
combination with an electronic ignition lock.
The ignition run-on function allows you to leave
the ignition switched on and pull out key
=
from
the ignition lock. This means you can leave and
lock the cab when the ignition is switched on or
use additional functions of the multifunction
key. The ignition run-on function is limited to a
duration of a maximum of 60 minutes. Then the
ignition lock switches to position 0 and switches
off the ignition.
X Push Start/Stop button
:
in to the first
switching threshold and hold.
X
Remove the key.
The on-board computer shows the
Igni‐
tion, delayed switch-off active
event
window.
i Only release Start/Stop button
:
once you
have completely removed the key.
X Release Start/Stop button
:
.
The ignition lock stays in position 2.
If you re-insert the key in the key slot, the igni-
tion run-on function is deactivated again.
Engine run-on
G
WARNING
When using the engine run-on function, the
vehicle may start to roll if crawler mode is
activated and the pulling-away gear is
engaged. There is a risk of an accident.
When using the engine run-on function:
R
shift the transmission into neutral.
R
apply the parking brake.
The engine run-on function is only available in
combination with an electronic ignition lock.
The engine run-on function allows you to leave
the engine running while stationary and pull out
key
=
from the ignition lock. This means, for
example, that you can lock the cab and use
power take-off or level control in working mode.
X
Stop the vehicle.
X Press Start/Stop button
:
in to the first
switching threshold and hold.
X
Remove the key.
The on-board computer shows Shunting
speed only
in the event window.
i Only release Start/Stop button
:
once you
have completely removed the key.
X
Release Start/Stop button
:
.
The ignition lock remains in position 2 and the
engine is left running.
The vehicle speed is limited to approximately
6 km/h while the engine run-on function is
active.
If you re-insert the key in the key slot, the engine
run-on function is deactivated again.
Before driving off
Important safety notes
G
WARNING
If objects, luggage or loads are not secured or
not secured sufficiently, they could slip, tip
over or be flung around and thereby hit vehicle
occupants. There is a risk of injury, especially
when braking or abruptly changing directions.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
Driving
239
Driving mode
Z