Mercedes-Benz Actros 2017 Page 182 Operating Instructions Manual Download

Page: 182 / 436

Semitrailers

Display messages

Possible causes/consequences and

Solutions

Open semitrailer

coupling

The

indicator lamp lights up red in the status area of the on-

board computer as well as in the event window.
If the on-board computer displays a warning and a warning tone

sounds:

the semitrailer coupling pin was detected during coupling/decou-

pling and

the sensor-monitored semitrailer is not engaged

WARNING

The semi-trailer can become decoupled.
There is a risk of an accident.

During decoupling: continue the process.

During coupling: check the locking mechanism of the sensor-moni-

tored semitrailer coupling.

Couple the semitrailer again.

Driving level below

coupling level

The

indicator lamp lights up red in the status area of the on-

board computer as well as in the event window. If the on-board com-

puter displays a warning and a warning tone sounds, the semitrailer is

no longer detected during reversing. The sensor-monitored semi-

trailer has not been coupled yet.

Correct the coupling level until the on-board computer displays the

grey

Coupling level reached

event window.

Check semitrailer

coupling

Additional text

Check semitrailer coupling: open if

needed

The

indicator lamp lights up red in the status area of the on-

board computer as well as in the event window.
If the on-board computer displays a warning and a warning tone

sounds, the sensor-monitored semitrailer coupling is engaged and the

semitrailer has not been detected.

WARNING

The semi-trailer can become decoupled.
There is a risk of an accident.

Check the coupling on the sensor-monitored semitrailer.

180

On-board computer event window

On-board computer and displays

Summary of Contents for Actros 2017





















































































































































































































































































































































































































































Search results

Summary of Contents for Actros 2017

Reviews:

Related manuals for Actros 2017

Brands by name

Popular brands

Mercedes-Benz Actros 2017, Operating Instructions Manual

Search results

Summary of Contents for Actros 2017

Reviews:

Related manuals for Actros 2017

Brands by name

Popular brands