Mercedes-Benz Actros 2017, Operating Instructions Manual, Page: 79 / 436

Beds in an L cab
Overview
The following beds may be fitted in the L cab:
R
Upper bed, narrow (
Y
page 77)
R
Upper bed, wide (
Y
page 77)
R
Upper bed (car transporter with two beds)
(
Y
page 78)
R
Foldable upper bed
R
Lower bed (
Y
page 78)
R
Seat/berth combination (
Y
page 79)
R
SoloStar Concept (
Y
page 81)
Upper bed
Climbing aids
Example: engine tunnel stowage compartment
Use the surface next to the cup holders or the
stowage space on the engine tunnel as climbing
aids for the upper bed.
Upper bed, wide/narrow
G
WARNING
A vehicle occupant on the bed while the vehi-
cle is in motion cannot be restrained. There is
a risk of serious or even fatal injuries.
Only use the bed when the vehicle is station-
ary.
! Make sure that the bed does not hit the
seats when you fold it up or down. Swing or
fold the backrests of the driver's and co-driv-
er's seats forward or adjust the seats further
forward. The bed can otherwise hit the seats
and damage both components.
Example: upper bed, wide
If the vehicle is on an uphill or downhill gradient,
the wide upper bed can be adjusted to a hori-
zontal position. To do this, adjust the angle of
the wide upper bed.
X
Adjust or fold the driver's and co-driver seat
backrests forward.
X If necessary, move the driver's and co-driver
seats sufficiently forward.
X
To fold down and adjust the angle: press
and hold release button
;
.
X
Swing the bed downwards.
X
Adjust the bed to the horizontal position using
the tubular spirit level in bracket
=
and cor-
rect the angle.
Move bracket
=
along the bed frame to fully
align the bed. You can unclip bracket
=
Beds in an L cab
77
Driver's workstation
Z