Loading and stowing
153
1
Connector
2
Connector holder
3
Lever
Warning symbol on the connector of the rear seat
belt status indicator
X
Press seat belt buckle
1
on the grooved
surface and remove seat belt buckle
1
from holder
3
.
i
When the ignition is switched on an indi-
cator is shows the status of the corre-
sponding rear seats in the upper multi-
function display. If, forexample, neither
seat belt buckle are is engaged, the mes-
sage:
<
No rear seat belt
engaged
appears.
X
Stow seat belt buckle
1
on seat belt
buckle holder
2
on the vehicle floor.
X
Pull holder
3
upwards and hold it securely.
4
Backrest release handle
5
Backrest
X
Pull left-hand or right-hand release handle
4
on backrest
5
.
Corresponding backrest
5
is unlocked.
X
Fold backrest
5
forwards past the vertical
to an angle of approximately 20°.
X
Hold backrest
5
with your free hand and
lift the backrest by pulling lever
3
.
i
For greater convenience, there is a recess
on the rear of the 2/3 backrest which
makes it easier to grasp the backrest.
X
Remove backrest
5
from the vehicle
through the rear door.
Fitting the backrest*
1
Recesses
Controls
169_AKB; 2; 4, en-GB
wdomann,
Version: 2.10.6
2008-07-16T08:52:06+02:00 - Seite 153
Z
Dateiname: 6515_0315_02_buchblock.pdf;
preflight