Seat belts
75
X
Route the belt over the centre of the shoul-
der without twisting it.
X
Engage belt tongue
2
into buckle
3
.
X
5-door vehicle: if necessary, adjust the
belt to the appropriate height
(
Y
page 75).
X
3-door vehicles: make sure that swivelling
belt guide
5
is in the correct position.
X
All: if necessary, pull upwards on the shoul-
der section of the belt to tighten the belt
across your body.
Routing the belt
X
Press release button
4
and guide belt
tongue
2
back towards belt sash guide
1
.
Belt warning for driver and front
passenger
The
<
seat belt warning lamp in the instru-
ment cluster reminds you that all passengers
should fasten their seat belts. It may light up
continuously or flash. Additionally, there may
be a warning tone.
The
<
seat belt warning lamp goes out and
the acoustic signal ceases as soon as the
driver and passenger have fastened their seat
belts.
For certain countries only: regardless of
whether the driver or the front passenger
already have their seat belt fastened, the
<
seat belt warning lamp lights up for six
seconds after the engine has been started. It
then goes out when the driver and front
passenger have already fastened their seat
belts.
i
Further information about the
<
seat
belt warning lamp (
Y
page 228).
Belt height adjustment
5-door vehicles only: you can adjust the
seat belt height on the driver's seat and front-
passenger seat.
Adjust the belt to a height that allows it to be
routed across the middle of your shoulder.
1
Release catch
X
To raise: slide the belt sash guide upwards.
The belt sash guide engages in various posi-
tions.
X
To lower: press and hold release button
1
.
X
Slide the belt sash guide downwards.
X
Let go of release button
1
and make sure
that the belt sash guide has engaged.
Controls
169_AKB; 2; 4, en-GB
wdomann,
Version: 2.10.6
2008-07-16T08:52:06+02:00 - Seite 75
Z
Dateiname: 6515_0315_02_buchblock.pdf;
preflight