Loading and stowing
157
1
Connector
2
Lever
3
Cable box
X
Swing lever
2
forwards and pull upwards.
The seat slides out of the front mounting
cups.
X
Take hold of the seat at the back of the
backrest and at the front edge of the seat
cushion.
X
Guide the seat through the front-passenger
door opening.
X
Open cable box
3
and place connector
1
inside.
X
Close cable box
3
.
G
Risk of injury
The front-passenger seat which has been
removed contains an active sidebag. Do not
attach a power source to the connector on
the seat, otherwise the airbag could inflate.
Store the seat out of the reach of children.
Fitting the front-passenger seat
G
Risk of injury
The mounting cups must be free from dirt
and other items in order for the front-
passenger seat to engage securely.
You must connect up the connector, so that
the front-passenger airbag can deploy in
the event of an accident.
If it is not connected and the engine is run-
ning, the
5
PASSENGER AIRBAG OFF
warning lamp flashes and the
1
warning
lamp lights up after a short time.
1
Rear mounting cups
2
Front mounting cups
3
Connector
4
Cable box
5
Lever
6
Seat frame
X
Take connector
3
out of cable box
4
and
place it at the front.
X
Take hold of the seat at the back of the
backrest and at the front edge of the seat
cushion.
Controls
169_AKB; 2; 4, en-GB
wdomann,
Version: 2.10.6
2008-07-16T08:52:06+02:00 - Seite 157
Z
Dateiname: 6515_0315_02_buchblock.pdf;
preflight