5
Mercedes-Benz Wallbox
| Preparations, installation and taking into operation
Preparations, installation and taking
into operation
Introducing the product
The Mercedes-Benz Wallboxes are entirely manufactured in Germany and at all times comply with the regulations and norms
for the charging of electric vehicles applicable throughout Europe according to IEC 61851-1, Mode 3 – please also refer to the
section on”Guidelines & Norms” on page 24. According to their requirements, users may select from models with charging
socket or fixed charging cable, which are designed for domestic and also for semi-public applications.
We place the highest value on user safety in all our products. To this end, your wallbox provides integrated DC fault current
detection, ensuring the proper functioning of upstream RCCBs in case of DC fault currents.
The wallbox is especially easy to operate during everyday use: Three LED lights in the lower part of the housing cover allow
you to check the current operating status at any time. Should a malfunction occur, you can identify the cause by its specific
LED error code without having to open the housing. After being taken into operation by a specialist contractor, the Mercedes-
Benz Wallbox is ready for charging at any time, while each charging process must be separately authorized via the integrated
key switch.
Unpacking and components included
The Mercedes-Benz Wallbox package includes a range of accessory components needed for installation and proper operation.
Therefore, please check immediately after unpacking (together with the customer, if required) whether the following compo-
nents are included:
Component
Quantity
Description
Wallbox
1
Charging station, consisting of plastic housing with lockable cover and separate mounting plate.
Quick start guide
1
Quick start guide including safety notices in printed form
Installation kit
1
Set of fixings for wall mounting, consisting of 2 x 4 screws as well as matching wall plugs, triangular key, key for the
key switch (2 pcs), strain relief including screws (2 pcs), sealing grommets for openings at the back of the housing (3
pcs)
Should one or more of the components listed above be missing after unpacking, please contact your local Mercedes-Benz
partner immediately.
Identifying your model variant
The Mercedes-Benz Wallbox is available in a range of model variants that are
mechanically and electrically tailored to different application profiles.
An additional product label with the specific Mercedes-Benz product identifi-
cation number for the wallbox is located on the underside of the wallbox. For
identification, the model code (A000 906 XX XX) as well as the power supply
ratings (voltage, frequency, current) indicated below it are especially relevant.
