Mercedes-Benz 2011 CL-Class, Operator'S Manual

Page: 235 / 480

X
To set the ambient lighting: select
Vehicle
in the main function bar by sliding
XVY
and turning
cVd
the COMAND
controller and press
W
to confirm.
The main area is active.
X Select the
Ambient lighting
menu by
sliding
XVY
or turning
cVd
the COMAND
controller.
The ambient lighting menu appears. The
current setting is indicated by a
#
dot.
X
Select Setting by sliding
ZV Æ
or turning
cVd
the COMAND controller.
The selected setting is indicated by a
#
dot.
Switching locator lighting on/off
If you switch on the locator lighting, the
following come on in the dark after you have
unlocked the vehicle using the remote
control:
R
the side lamps
R
the tail lamps
R
the license plate lamp
R
the front fog lamps
R
the entry lamps in the exterior mirror
The locator lighting switches off again when
you open the driver’s door. If you do not open
the driver’s door, the locator lighting switches
off automatically after 40 seconds.
X
To switch locator lighting on/off: select
Vehicle
in the main function bar by sliding
XVY
and turning
cVd
the COMAND
controller and press
W
to confirm.
The main area is active.
X Select the
Locator lighting
function by
sliding
XVY
or turning
cVd
the COMAND
controller and press
W
to confirm.
Switching the automatic locking
feature on/off
You can use this function to activate or
deactivate the automatic central locking
feature. If the automatic locking feature is
activated, your vehicle will lock centrally from
a speed of approximately 15 km/h.
You will find further information about the
automatic locking feature in the "Automatic
locking feature" section (
Y
page 79).
X
To switch the automatic locking
feature on/off: select
Vehicle
in the
main function bar by sliding
XVY
and
Vehicle
233
COMAND
Z