Mercedes-Benz 2010 E 350 4MATIC, Operator'S Manual

Page: 138 / 372

Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
You can connect your telephone to the
COMAND system via Bluetooth
®
, see
separate COMAND system operating
instructions.
X
Switch on the COMAND system.
Refer to separate COMAND system
operating instructions.
X
Press button
=
or
;
to select the
Tel
menu.
One of the following messages will appear
in the multifunction display:
R
No Service
: No network is available.
R
Ready for Bluetooth Telephony...
:
The telephone has not been connected
to the COMAND system via Bluetooth
®
yet.
X
Connect the telephone to the
COMAND system via Bluetooth
®
.
R
Phone READY
or name of the network
provider (if available): The telephone has
found a network and is ready for use. You
can operate it using the control system.
Answering a call
When your telephone is ready to receive calls,
you can answer a call at any time. In the
multifunction display you will then see the
following message:
Example illustration
X
Press button
6
.
You have answered the call.
The caller’s number appears only if it is
transmitted.
The caller’s name appears only if the number
and the name are stored in the phone book.
Ending a call or rejecting an incoming
call
X
Press button
~
.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
i To use the phone book of the COMAND
system you can import business cards
(vCards) from external Bluetooth
®
phones
into your COMAND system’s phone book,
see separate COMAND operating
instructions.
X
Press button
=
or
;
to select the
Tel
menu.
X
Press button
:
or
9
or
a
to
switch to the phone book.
The stored names are displayed in
ascending alphabetical order.
X
Press button
:
or
9
to select the
desired entry.
If you press and hold button
:
or
9
the system scrolls rapidly through the
list of names (quick search). After holding
button
:
or
9
for a short while the
scrolling speed increases. Release the
button to stop the quick search. The search
stops automatically at the end of the list.
136
Control system
Controls in detail
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 136