X
Switch on the ignition.
X
Press button
;
, to select the passenger-
side exterior rear view mirror.
X
Shift the automatic transmission into
reverse gear
R.
The passenger-side exterior rear view
mirror moves to the preset parking
position.
X
Adjust the passenger-side exterior rear
view mirror with adjustment button
=
so
that you see the rear wheel and the road
curb.
The exterior rear view mirror parking
position is stored.
You can also store the parking position using
the memory button
M
?
:
X
Switch on the ignition.
X
Press button
;
, to select the passenger-
side exterior rear view mirror.
X
Adjust the passenger-side exterior rear
view mirror with adjustment button
=
so
that you see the rear wheel and the road
curb.
X
Press memory button
M
?
and within
3 seconds, press one of the arrows of
adjustment button
=
.
The parking position is stored if the exterior
rear view mirror does not move.
i
If the exterior rear view mirror does move,
repeat the above steps. After the setting is
stored, you can move the exterior rear view
mirror again.
Calling up the parking position
X
Switch on the ignition.
X
Press button
;
, to select the passenger-
side exterior rear view mirror.
X
Shift the automatic transmission into
reverse gear
R.
The passenger-side exterior rear view
mirror moves to the stored parking
position.
The passenger-side exterior rear view mirror
returns to its previously stored driving
position
R
10 seconds after you have put the gear
selector lever out of reverse gear
R
R
immediately once your vehicle exceeds a
speed of approximately 6 mph (10 km/h)
R
immediately when you press button
:
to
select the driver’s side exterior rear view
mirror
Memory function
Notes
With the memory function you can store up
to three different configurations per front
seat.
Each memory position button on the driver’s
side can store all of the following settings:
R
Seat position
R
Drive-dynamic multicontour seat: Drive-
dynamic function level
R
Steering wheel position
R
Exterior rear view mirrors’ position
G
Warning!
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
Each memory position button on the front
passenger side can store the setting of the
seat position.
96
Memory function
Controls in detail
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 96
Summary of Contents for 2010 E 350 4MATIC
