Mercedes-Benz 2007 R 320 CDI, Operator'S Manual

Page: 147 / 570

146
Controls in detail
Lighting
For information on how to switch on the
headlamps and use the turn signals, see
“Switching on headlamps” (
컄
page 59)
and “Turn signals” (
컄
page 60).
Exterior lamp switch
M
Off
Daytime running lamp mode
(
컄
page 148)
U
Automatic headlamp mode
Daytime running lamp mode
(
컄
page 147)
C
Parking lamps (also tail lamps,
license plate lamps, side marker
lamps, instrument panel lamps)
B
Low beam headlamps or high beam
headlamps when the combination
switch is pushed forward. The tail
lamps, license plate lamps, side
marker lamps, parking lamps and
instrument panel lamps also come
on.
ˆ
Standing lamps, right (turn left one
stop)
‚
Standing lamps, left (turn left two
stops)
‡
Indicator lamp for front fog lamps*
†
Indicator lamp for rear fog lamp
i
If you drive in countries where vehicles drive
on the other side of the road than the country in
which the vehicle is registered, you must have
the headlamps modified for symmetrical low
beams. Relevant information can be obtained at
any authorized Mercedes-Benz Light Truck
Center.
i
Vehicles with active Bi-Xenon* headlamps:
The active Bi-Xenon* headlamps monitor the
vehicle’s steering angle and speed, then auto-
matically shift their beams to either side to
better follow the curvature of the road ahead, in-
creasing usable illumination over conventional
headlamps.
i
If you hear a warning signal when exiting the
vehicle, you have forgotten to switch off the ex-
terior lamps.
In addition the message Switch off lights
appears in the multifunction display.
Switch off the exterior lamps.
i
With the daytime running lamp mode activat-
ed and the engine running, the low beam head-
lamps cannot be switched off manually.
For information on how to activate the daytime
running lamp mode, see “Daytime running lamp
mode” (
컄
page 148).